连铸结晶器内部流场及熔渣卷入的数值模拟

针对连铸结晶器内部流场及熔渣卷入过程 ,提出了两方程k -ε湍流模型和充填法数值计算模型 ,并采用硅油 /水模拟体系代替熔渣 /钢液体系 ,进行了模拟试验和数值计算。对充气造成的浸入式水口水流脉动的影响进行分析。计算结果与试验结果符合良好 ,表明本文所采用的数值模拟方法是适用的     

Spatial Estimates for the Constrained Anisotropic Elastic Cylinder

This paper establishes spatial estimates in a prismatic (semi-infinite) cylinder occupied by an anisotropic homogeneous linear elastic material, whose elasticity tensor is strongly elliptic. The cylinder is maintained in equilibrium under zero body force, zero displacement on the lateral boundary and pointwise specified displacement over the base. The other plane end is subject to zero displacement (when the cylinder is finite, say). The limiting case of a semi-infinite cylinder is also considered and zero displacement on the remote end (at large distance) is not assumed in this case. A first approach is developed by considering two mean-square cross-sectional measures of the displacement vector whose spatial evolution with respect to the axial variable is studied by means of a technique based on a second-order differential inequality. Conditions on the elastic constants are derived that show the cross-sectional measures exhibit alternative behaviour and in particular for the semi-infinite cylinder that there is either at least exponential growth or at most exponential decay. A second approach considers cross-sectional integrals involving the displacement and its gradient and furnishes information upon the spatial evolution, without restricting the range of strongly elliptic elastic constants. Such models are principally based upon a first-order differential inequality as well as on one of second order. The general results are explicitly presented for transversely isotropic materials and graphically illustrated for a cortical bone.     

The construction and application of an atomistic J-integral via Hardy estimates of continuum fields

In this work we apply a Lagrangian kernel-based estimator of continuum fields to atomic data in order to estimate the J-integral for the analysis of cracks and dislocations. We show that this method has the properties of: consistency between the energy, stress and deformation fields; path independence of the contour integrals of the Eshelby stress; and excellent correlation with linear elastic fracture mechanics theory for appropriately constructed simulations. We discuss the appropriate reference configuration and reference energy for this type of analysis. Lastly, we use canonical examples to demonstrate that the proposed method is a direct and rational approach for estimating the configurational forces on atomic defects.     

组合导航系统多重衰减因子自适应估计算法比较研究

提出了多重衰减因子自适应估计卡尔曼滤波方法,用该方法对系统每个误差状态估计进行控制,提高滤波器的估计性能。仿真结果表明,新算法在系统噪声特性不准确的情况下,能够抑制卡尔曼滤波估计的发散,GPS/SINS组合导航精度比强跟踪滤波估计的精度高。这种算法推导形式简单,计算量小,适合在线运算。     

Subsonic Radiation Gas Dynamics in a Laser Plasma Generator Channel

The radiation gasdynamic processes in the channel of an air laser plasma generator operating at atmospheric pressure are analyzed. In the multigroup approximation a numerical radiation gasdynamic model is formulated on the basis of the equations of motion of a viscous heat-conducting gas and the selective thermal radiation transport equation. Laminar and turbulent subsonic generator operation regimes are considered.For the purpose of approximately describing the turbulent gas and plasma mixing the Navier-Stokes equations averaged after Reynolds and the k-ε turbulence model are used. The problem is solved in the time-dependent two-dimensional axisymmetric formulation.Strong radiation-gasdynamic interaction regimes are investigated. In these regimes the energy losses due to radiation from the high-temperature region of the laser plasma and the absorption of its thermal self-radiation by the surrounding plasma and gas layers (radiation reabsorption) appreciably affect the gasdynamic flow structure. Two methods of integrating the selective thermal radiation transport equation in the generator channel are discussed. In one of these the thermal radiation transport is calculated inside the heated volume and in the other the radiation heat fluxes are calculated on the surfaces bounding the volume. The results of calculating the spectral and integral radiation heat fluxes on the inner surface of the generator are given.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, 2005, pp. 126–143.Original Russian Text Copyright © 2005 by Surzhikov.     

Self-assembly and aggregation of ATRP prepared amphiphilic BAB tri-block copolymers contained nonionic ethylene glycol and fluorescent 9,10-di(1-naphthalenyl)-2-vinyl-anthracene/1-vinyl-pyrene segments

Two novel amphiphilic BAB-type block copolymers, ADN-PEG3400-ADN and Py-PEG3400-Py containing deep blue and bluish-green fluorescent moieties were prepared using atom transfer radical polymerization (ATRP) (where, ADN = poly(9,10-di(1-naphthalenyl)-2-vinylanthracene), Py = poly(1-vinyl pyrene) and PEG3400 = poly(ethylene glycol) with M_n = 3400 g/mol). The GPC number averaged molecular weights (MW) of the block copolymers were M_n = 9600 and 13,800 g/mol, respectively, based on polystyrene MW standards. The PEG3400 segment has a melting temperature (T_m peak) at 64–65 °C, whereas the glass transition temperatures (T_g midpoint) of the ADN and Py segments were found to be 230 °C and 193 °C, respectively, and are similar to their respective homopolymers indicating complete microphase segregration. The photoluminescence (PL) emission of the copolymers ADN-PEG3400-ADN exhibited two maxima at 423.5 nm and 441.5 nm while Py-PEG3400-Py has a maximum at 488.5 nm. Both copolymers form individual spherical micelles with diameter from 30 to 90 nm for Py-PEG3400-Py and 40–160 nm for ADN-PEG3400-ADN. The micelles, however, transform into cross-linked pearl-necklace-like aggregates at polymer concentrations above 1000 ppm, which may be attributed to the physical cross-linking between adjacent spherical micelles caused by the PEG3400 segments.     

Novel chemical synthesis of polypyrrole thin film electrodes for supercapacitor application

Present investigation describes the cost-effective, novel and simple chemical synthesis of polypyrrole (PPy) thin films for supercapacitor application. These PPy films are characterized by different techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The XRD pattern reveals the amorphous nature of PPy thin film, which is highly feasible for supercapacitors. Further, FTIR study confirms the formation of PPy. The surface morphological study exhibit the coverage of uniform and smooth morphology on thin film. The electrochemical supercapacitive properties of PPy thin films are evaluated using cyclic voltammetry (CV) in 0.5 M H₂SO₄ electrolyte, which exhibits the maximum specific capacitance of 329 Fg⁻¹ at the scan rate of 5 mV s⁻¹. Additionally, an equivalent series resistance (ESR) of PPy thin films is found to be 1.08 Ω using electrochemical impedance measurement.     

Secure Polar Coding for the Primitive Relay Wiretap Channel

With the emergence of wireless networks, cooperation for secrecy is recognized as an attractive way to establish secure communications. Departing from cryptographic techniques, secrecy can be provided by exploiting the wireless channel characteristics; that is, some error-correcting codes besides reliability have been shown to achieve information-theoretic security. In this paper, we propose a polar-coding-based technique for the primitive relay wiretap channel and show that this technique is suitable to provide information-theoretic security. Specifically, we integrate at the relay an additional functionality, which allows it to smartly decide whether it will cooperate or not based on the decoding detector result. In the case of cooperation, the relay operates in a decode-and-forward mode and assists the communication by transmitting a complementary message to the destination in order to correctly decode the initial source’s message. Otherwise, the communication is completed with direct transmission from source to the destination. Finally, we first prove that the proposed encoding scheme achieves weak secrecy, then, in order to overcome the obstacle of misaligned bits, we implement a double-chaining construction, which achieves strong secrecy.     

Ultrasound irradiation as an effective tool in synthesis of the slag-based catalysts for carboxymethylation

Waste minimization strategy was applied in the current work for synthesis of the catalysts from industrial solid waste, namely desulfurization slag. The starting slag material comprising CaCO₃, Ca(OH)₂, SiO₂, Al₂O₃, Fe₂O₃, and TiO₂ was processed by various treating agents systematically varying the synthesis parameters. A novel efficient technique – ultrasound irradiation, was applied as an additional synthesis step for intensification of the slag dissolution and crystallization of the new phases. Physico-chemical properties of the starting materials and synthesized catalysts were evaluated by several analytical techniques. Treatment of the industrial slag possessing initially poor crystal morphology and a low surface area (6 m²/g) resulted in formation of highly-crystalline catalysts with well-developed structural properties. Surface area was increased up to 49 m²/g. High basicity of the neat slag as well as materials synthesized on its basis makes possible application of these materials in the reactions requiring basic active sites. Catalytic performance of the synthesized catalysts was elucidated in the synthesis of carbonate esters by carboxymethylation of cinnamyl alcohol with dimethyl carbonate carried out at 150 °C in a batch mode. Ultrasonication of the slag had a positive effect on the catalytic activity. Synthesized catalysts while exhibiting similar selectivity to the desired product (ca. 84%), demonstrated a trend of activity increase for materials prepared using ultrasonication pretreatment. The choice of the treating agent also played an important role in the catalytic performance. The highest selectivity to the desired cinnamyl methyl carbonate (88%) together with the highest activity (TOF₃₅ = 3.89*10⁻⁷ (mol/g*s)) was achieved over the material synthesized using 0.6 M NaOH solution as the treating agent with the ultrasound pre-treatment at 80 W for 4 h.     

含参广义集值强向量平衡问题的稳定性

本文借助集合极限的性质和弱f-性假设证明了含参广义集值强向量平衡问题解集映射的下半连续性,其方法不同于最近文献(Zhao,2016和Meng,2018).此外,建立了含参广义集值强向量平衡问题解集连通性的充分条件,并举例验证了所得结果的正确性.本文得结果推广和改进了已有文献(Gong,2008,Xu,2009,Chen,2010,Xu,2013和Zhao,2013)中相应结果.